Hi As I want to use UWG software. Please let me know from where I can download this software and also, request you to kindly generate the UWG code.

Thanks you in advance. Regards Neha

Regards Neha

Views: 67

Reply to This

Replies to This Discussion

http://urbanmicroclimate.scripts.mit.edu/uwg.php

https://github.com/hansukyang/UWG_Matlab

https://www.aikonakano.com/uwg.php

https://vimeo.com/152094093

These are some links related to UWG. I tried older versions but faced with some problems. It doesn't work for me and I no longer use it. You can check for other resources in the web.

There is a conversation with topic "UMI and UWG" in the forum. You can read it for details.

http://www.grasshopper3d.com/group/ladybug/forum/topics/problem-wit...

Ladybug tool is a different software and I have no experience with it. There is some information about it in grasshopper forums.

Hello Kerem

Thankyou for your reply. I have downloaded the software as per the mentioned link. 

The problem which i am facing are:

1. When i run UWG separately, so itask to locate the below parameters.

Rural weather file selected

Urban Parameter file selected

Save location selected; but then after a while it gives an error in=>UWG.m at line 735 (which comes after putting the .xml file.

2. I am wondering why the The command UmiRunUwg is not popping up in umi. Is there some issue with the installation of uwg.

please help.

thanks



Kerem Beygo said:

http://urbanmicroclimate.scripts.mit.edu/uwg.php

https://github.com/hansukyang/UWG_Matlab

https://www.aikonakano.com/uwg.php

https://vimeo.com/152094093

These are some links related to UWG. I tried older versions but faced with some problems. It doesn't work for me and I no longer use it. You can check for other resources in the web.

There is a conversation with topic "UMI and UWG" in the forum. You can read it for details.

http://www.grasshopper3d.com/group/ladybug/forum/topics/problem-wit...

Ladybug tool is a different software and I have no experience with it. There is some information about it in grasshopper forums.

As I said before I could not run UWG properly, and I haven't got any results. Try to contact to developers in the links.

OK thanks Kerem

Reply to Discussion

RSS

In Short

Umi is a Rhino-based design environment for architects and urban planners interested in modeling the environmental performance of neighborhoods and cities with respect to operational and embodied energy use, walkability and daylighting potential. Since 2012, Umi has been  developed by the Sustainable Design Lab at the Massachusetts Institute of Technology with support from a National Science Foundation EFRI_SEED project, the MIT Energy Initiative, the Kuwait-MIT Center, the Center for Complex Engineering Systems (CCES) at KACST and MIT, Transsolar Climate Engineering and United Technologies Corporation. Further tool developed is now also being conducted at the Environmental Systems Lab at Cornell University.

A first public version of Umi was released during a public symposium on Sustainable Urban Design on May 6th 2013 at the Massachusetts Institute of Technology. Version 2.0, which also includes an embodied energy module, was released on November 7th 2014.

© 2017   Created by Christoph Reinhart.   Powered by

Badges  |  Report an Issue  |  Terms of Service