When I first wired the phone to replace the screen, I took a new screen into the service.
The replacement has not been done properly, so after a few months I have a broken phone again.
I decided to fix the phone myself. I opened it but I do not know which screen I need to embed.
The first time the screen was replaced, I did not have a light sensor.
On the phone, the date is: 2016-11-26 and on the screen 2016-09-28.
I found two types of screens on the Internet, but they differ only by date.
on one date 2016-09-02, and on the second is the date 2016-11-14.
Which screen do I need to incorporate?
thank you,

Views: 20

Reply to This

In Short

Umi is a Rhino-based design environment for architects and urban planners interested in modeling the environmental performance of neighborhoods and cities with respect to operational and embodied energy use, walkability and daylighting potential. Since 2012, Umi has been  developed by the Sustainable Design Lab at the Massachusetts Institute of Technology with support from a National Science Foundation EFRI_SEED project, the MIT Energy Initiative, the Kuwait-MIT Center, the Center for Complex Engineering Systems (CCES) at KACST and MIT, Transsolar Climate Engineering and United Technologies Corporation. Further tool developed is now also being conducted at the Environmental Systems Lab at Cornell University.

A first public version of Umi was released during a public symposium on Sustainable Urban Design on May 6th 2013 at the Massachusetts Institute of Technology. Version 2.0, which also includes an embodied energy module, was released on November 7th 2014.

© 2018   Created by Christoph Reinhart.   Powered by

Badges  |  Report an Issue  |  Terms of Service